Oceanic OCEACLIM700W9 Guide D'utilisation page 43

3. Connect the connector to the unit by sliding it into the slot on the back of the unit.
(Figure 2)
Figure 2
Unfold the hose to the desired length and then pass the other end of the hose through the
window to allow the hot air to escape to the outside. (Figure. 3)
Figure 3
Important :
• The flexible hose can be stretched and measure from 30 to 150cm as needed.
This length has been set according to the specifications of the air conditioner. Do not use
an extension cord or other hose than the one supplied as this may affect the proper
operation of the appliance.
• The air must be able to circulate freely, any obstruction that may cause the air conditioner
to overheat. Make sure that the hose does not kink or bend.
Figure 4
42