Simco-Ion ThunderION IQ 2.0 Notice D'utilisation page 76

To select the different modes, go to expert
mode 6.2 (if not selected earlier):
- Click on the Information tab of the
ThunderION IQ [
- Click on the settings button
- Click on behind Operation mode
- Select the desired operation mode
(CLFB & Auto tune is not available at this time)
6.2.2.1 Operation mode Manual
After Manual mode is selected, go to the parameter HV Balance offset using the next page
symbol:
By sliding the slider or pushing the button
be produced for neutralising the positive charge and towards +100 more positive ions will be
produced for neutralising the negative charge.
Note: the final balance can be disturbed if
a too extreme setting is chosen.
[ (n)x
slide slider or with
and confirm with
The ionisation will now be continued with this setting.
ThunderION2ThunderIONIQ2_UM_9752160050_NL_D_GB_F_V2_3
]
"HV balance offset"
to the desired value
]
towards -100, increasingly more negative ions will
GB
75