Antari S-100X Mode D'emploi page 8

Maintenance
1. Do not allow the snow liquid to become contaminated. Always place the caps back on the
liquid container and the snow machine liquid tank immediately after filling.
2. Before storing away after each operation, rinse the system with distilled water and let it
pump for at least 1or 2 minutes. This step helps to ensure a longer life span of the motor
and the nozzle.
3. It is strongly recommended to regularly clean the dust/residue around the machines' vent
holes (on both sides of the machine). Simply use a small brush, a toothbrush for example,
and gently brush in the direction from top to bottom. This step helps to ensure that minimal
debris will get into the machine and causes clogging.
8