Publicité
Les langues disponibles
Les langues disponibles
DMX Protocol
DMX VALUE
0-5
6-255
c)
Addressing:
Each device occupies 1 channel. To ensure that the control signals are properly directed
to each device, they require addressing. This is to be adjusted for every single device by
changing the DIP switches as set out in the table below.
The starting address is defined as the first channel from which the device will respond to
the controller. Please make sure that you do not have any overlapping channels in order
to control each device correctly and independently from any other fixture on the DMX
data link. If two, three or more devices are addressed similarly, they will work similarly.
DMX Address Setting
Dip Switch Corresponding Chart
Channel No.
Dip Switch
Example 1: Set DMX starting address to 69
Dip switch # 7 = 64 channel
Dip switch # 3 = 4 channel
Dip switch # 1 = 1 channel
Total = 64 + 4 + 1 = 69 channel
1
2
4
8
1
2
3
4
OFF
ON
16
32
64
5
6
7
7
128
256
8
9
Publicité
