Displaying Weight Permanently (Hold); Measuring Height; Measuring Heights - Seca 777 Mode D'emploi

Displaying weight permanently

5.4 Measuring height

Measuring heights < 1.22 m
6. Read off the measuring result.
7. To deactivate the
message
NET
NOTE
When you switch off the measuring station, the
deactivated automatically.
If you activate the
(Hold)
1. Press the
Hold
The display flashes until a stable weight is measured. The weight value is
displayed permanently. The message
2. Read off the measuring result.
3. To deactivate the
You can measure height using the integrated measuring rod.
CAUTION!
Injury from incorrect position of the measuring flap
Injuries may result if the measuring flap is at patient height when
folded up.
► Ensure that the measuring flap is above patient height before the
patient steps onto the weighing platform.
When measuring heights < 1.22 m, the measuring result is read off under the
head slide (read-off edge 1).
1. Ensure that the upper telescopic element is in its lowest position.
2. Release the head slide by pressing on the latch and moving the head slide
downward.
function, keep the
Tare
is no longer displayed.
function, the weight value is displayed permanently.
Hold
 key.
function, press the
Hold
English
 key depressed until the
Tare
function is
Tare
is displayed.
HOLD
 key.
Hold
Operation • 23