Publicité
Les langues disponibles
Les langues disponibles
5
5
TECHNIC L INFORM TION FOR THE INST LLER
Before installing the hob, remove the protective film.
This hob may be built into a worktop of 30 to 40 mm thick and 600 mm deep.
In order to install the hob into the kitchen cabinet, an aperture with the dimensions
shown in fig. 5.1 has to be made, keeping in consideration the following:
inside the cabinet, between the bottom side of the hob and the upper surface of any
other appliance or internal shelf there must be a clearance of at least 30 mm;
the hob must be installed no less than 200 mm away from any side wall;
the
hob
installed at a distance of
no less than 50 mm
from the rear wall.
there must be a dis-
tance of at least 650
mm between the hob
and any wall cabinet or
extractor hood posi-
tioned
immediately
above (see fig. 5.2)
the coatings of the walls
of the unit or appliances
near the hob must be
heat resistant.
Do not install the appli-
ance near inflammable
materials (eg. curtains).
18
INST LL TION
must
be
Fig. 5.2
Fig. 5.1
Publicité
