Installation
IMPORT NT
The appliance should be installed, regulated and adapted to function by a QUALI-
FIED INSTALLATION TECHNICIAN.
Failure to comply with this condition will render the guarantee invalid.
The appliance must be installed in compliance with regulations in force and following
the manufacturer's instructions.
Installation technicians must comply to current laws in force concerning ventilation
and the evacuation of exhaust gases.
Always unplug the appliance before carrying out any maintenance operations or
repairs.
The appliance must be housed in heat-resistant units.
These tops are designed to be embedded into kitchen fixtures measuring 600
mm in depth.
The walls of the units must not be higher than work top and must be
capable of resisting temperatures of 75 °C above room temperature.
Do not instal the appliance near inflammable materials (eg. curtains).
WARNING
When correctly installed, your product meets all safety requirements laid down
for this type of product category.
However special care should be taken around the underneath of the appliance
as this area is not designed or intended to be touched and may contain sharp
or rough edges, that may cause injury.
advice
17