Publicité
Les langues disponibles
Les langues disponibles
CORRECT REPL CEMENT OF THE BURNERS
It is very important to check that the burner flame spreader F and the cap C have
been correctly positioned (see figs. 4.1 and 4.2).
Failure to do so can cause serious problems.
In appliances with electric ignition, check that the electrode S (fig. 4.1) is always clean to
ensure trouble-free sparking.
In the models with safety device, check that the probe T (fig. 4.1) next to each burner
is always clean to ensure correct operation of the safety valves.
Both the probe and ignition plug must be very carefully cleaned.
CORRECT POSITION OF TRIPLE RING BURNER
The triple ring burner must be correctly positioned (see fig. 4.3); the burner rib must be
fitted in their housing as shown by the arrow.
The burner correctly positioned must not rotate (fig. 4.4).
Then position the cap A and the ring B (fig. 4.4 - 4.5).
Fig. 4.3
A
B
Fig. 4.5
Fig. 4.4
16
Publicité
