Publicité
Les langues disponibles
Les langues disponibles
G S T PS
In the event of operating faults in the gas taps, call the Service Department
BURNERS ND GRIDS
These parts can be removed and cleaned with appropriate products.
After cleaning, the burners and their flame spreaders must be well dried and correctly
replaced.
It is very important to check that the burner flame spreader and the cap have been
correctly positioned. Failure to do so can cause serious problems.
In the models with safety device, check that the probe next to each burner is always
clean to ensure correct operation of the safety valves.
In appliances with electric ignition keep the electrode clean so that the sparks always
strike.
Note: To avoid damage to the electric ignition do not use it when the burners are
not in place.
C
F
Ignitor "S"
(some models only)
Flame failure probe "T"
(some models only)
Fig. 4.1
Fig. 4.2
15
Publicité
