Tunturi Pure 3.1 Mode D'emploi page 8

ELEVATION HOT KEYS:
Incline Hot Keys are set 3, 4, 5, 6, 7, 8, ,
9, 10, 11 and 12%
For example, the elevation level changes
from any level to 4% by pressing the
Elevation Hot Key 4.
USB CHARGER FUNCTION
The user can connect their device to
charge during workout.
LCD DISPLAY
DOT MATRIX:
The 10x12 dot matrix reflects incline
on the elevation programs (Program
1-4, 7, 10-11) and speed on the speed
programs (Program 5-6, 8-9) and the
user programs.
On programs 12-15 and in the manual
mode, the dot matrix displays a 0.4 km
running track.
INCLINE/PULSE:
Displays pulse rate except when
elevation is changed. To get a pulse rate,
place both of your hands on the pulse
grip bars. It is recommended to straddle
the walking belt to get an accurate
reading. If you are walking or jogging, it
is difficult for the monitor to accurately
read your pulse rate.
8
TIME/ PACE:
Shows Workout Time. Time begins at
00:00 and counts up. The maximum time
is 99:59.
Pace is minutes per mile and is
displayed when the SELECT key
is pressed. When the safety key
is inserted, this display shows the
accumulated distance (odometer) for
one second.
SPEED:
Displays the speed the treadmill belt is
moving.
DISTANCE/ ELEVATION GAIN:
Displays the distance, in miles or
kilometers, the treadmill belt has gone
on the current workout.
When SELECT key is pressed during
workout, it will display Elevation in meter,
the user has climbed during the current
workout.
CALORIES/ CALORIES PER HOUR:
Displays calories consumed.
Estimated calories per hour being
consumed is displayed when the
SELECT key is pressed..
NOTE:
METRIC/MILES:
If you want the treadmill to display the
values in miles, you can switch to miles
as follows:
1. During the power ON - manual mode,
first hold the ENTER button then
press the SELECT button together to
enter the Engineering Mode.
2. Calories window shows model no.,
Speed window shows software
version, Incline window shows year.
Time window shows date.
3. By pressing the ENTER button – the
Incline window shows ISP, Time
window shows ISP version, Speed
window shows 001, Distance window
shows LDU and Calories window
shows LDU version.
4. Press ENTER button again to enter
KM/MILE switch mode, Press SPEED
+ - or ELEVATION + - to select KM or
MILE.
8