Maytag MFF2558FEZ Manuel D'utilisation page 8

Refrigerator Door Handle Style 2
A. Handle Trim
B. Flat–Head Handle Screws
� Remove the screw cover.
� Remove the handle assembly. Keep all parts together.
� To replace the handles, reverse the directions.
Refrigerator Door Handle Style 3
A. Flat–Head Handle Screws
� Using a 3⁄32" or 1⁄8" hex key, loosen the two setscrews located
on the side of each handle. Pull the handle straight out from
the drawer. Make sure you keep the screws for reattaching the
handles.
� To replace the handles, reverse the directions.
Refrigerator Door Handle Style 4
A. Trim Screw
B. Handle Screws
8
C. Refrigerator Door Handle
B. Refrigerator Door Handle
C. Top Trim
D. Bottom Trim
� To remove the handle, remove the screw attaching the trim to
the upper end of the handle. Using a flat-blade screwdriver
wrapped in masking tape, pry the trim piece from the lower end
of the handle. Then, remove the screws attaching the handle
to the door.
� To replace handle, reverse directions.
Refrigerator Door Handle Style 5
� To remove the handle, grasp the lower part of the handle
firmly, slide the handle up and pull the handle straight out from
the door.
� To replace the handle, position the handle so that the large
holes in the mounting clips are down and align the holes with
the door studs. Rotate the handle so that the mounting clips
are flat against the door and slide the handle down to engage.
FREEZER DOOR HANDLES
Freezer Door Handle Style 1
A. 3/32" Setscrew
� Using a 3⁄32" or 1⁄8" hex key, loosen the two setscrews located
on the side of each handle. Pull the handle straight out from
the drawer. Make sure you keep the screws for reattaching the
handles.
� To replace the handles, reverse the directions.
Freezer Door Handle Style 2
A. Handle Trim
B. Flat–Head Handle Screws
� Remove the screw cover.
� Remove the handle assembly. Keep all parts together.
� To replace the handles, reverse the directions.
C. Freezer Drawer Handle