Maytag MFF2558FEZ Manuel D'utilisation page 10

4. Remove the center hinge pin and remove the hinge screws as
shown below. Lift the freezer door free from the cabinet.
A. Hinge Pin Cover
B. Center Hinge
5. Remove the base grille by grasping the grille firmly with both
hands and pulling it toward you.
6. Remove the parts for the bottom hinge as shown below.
A. Hinge Pin Shim
B. Bottom Hinge
C. Hinge Plate
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so could result in death or electrical shock.
FRENCH DOORS
1. Unplug refrigerator or disconnect power.
2. Keep the refrigerator doors closed until you are ready to lift
them free from the cabinet.
NOTE: Provide additional support for the refrigerator door
while the hinges are being removed. Do not depend on the
door gasket magnets to hold the door in place while you are
working
10
C. Hinge Screws
D. Roller Bracket
E. 3/8" Hex-Head Screws
3. Starting with the right-hand side door, remove the parts for the
top hinge as shown below. Lift the refrigerator door from the
bottom hinge pin.
A. Hinge Cover Screw
B. Top Hinge Cover
4. Remove the hinge pin cover from the bottom hinge pin and
keep it for later use.
5. Before removing the left-hand side door, disconnect the wiring
plug located on top of the top hinge by wedging a flatblade
screwdriver or your fingernail between the two sections..
NOTE: The green, ground wire remains attached to the hinge.
6. Remove the parts for the left-hand side door top hinge as
shown in the Top Hinge graphic in Step 3. Lift the door from
the bottom hinge pin.
NOTE: Remove the hinge pin cover from the bottom hinge pin
and keep it for later use.
A. Hinge Pin Cover
B. Bottom Hinge
C. 5/16" Hex-Head Hinge Screws
D. Top Hinge
C. Hinge Screws