Maytag MFF2558FEZ Manuel D'utilisation page 12

NOTE: Provide additional support for the door while the
hinges are being moved. Do not depend on the door gasket
magnets to hold the door in place while you are working.
2. Assemble the parts for the top hinge as shown below. Do not
tighten screws completely.
A. Hinge Cover Screw
B. Top Hinge Cover
3. Adjust the door so that the bottom of the refrigerator door is
aligned with the top of the freezer drawer. Tighten all screws.
Standard Door - Freezer door models
1. Make sure the hinge plate is securely fastened behind the
roller bracket and that the hinge pin is inserted into the outside
hole. Fully tighten all roller bracket screws.
A. Hinge Pin Shim
B. Bottom Hinge
C. Hinge Plate
2. Remove the shim that you placed under the front edge of the
refrigerator cabinet. Replace the freezer door
NOTE: Provide additional support for the door while the
hinges are being moved. Do not depend on the door gasket
magnets to hold the door in place while you are working.
12
C. 5/16" Hex-Head Hinge Screws
D. Top Hinge
D. Roller Bracket
E. 3/8" Hex-Head Hinge Screws
3. Assemble the parts for the center hinge as shown below, and
tighten all the screws. Replace the refrigerator door.
A. Hinge Pin Cover
B. Center Hinge
4. Assemble the parts for the top hinge as shown below. Do not
tighten the screws completely.
5. Adjust the doors so that the bottom of the refrigerator door is
aligned with the top of the freezer door. Tighten all screws.
French Door Models
1. Assemble the parts for the top hinges as shown below. Do not
tighten the screws completely.
A. Hinge Cover Screw
B. Top Hinge Cover
2. Replace the parts for the bottom hinges as shown below.
Tighten screws. Replace the refrigerator doors.
A. Hinge Pin Cover
B. Bottom Hinge
NOTE: Provide additional support for the refrigerator doors
while the hinges are being moved. Do not depend on the door
gasket magnets to hold the doors in place while you are
working.
3. Align each door so that the bottom of the refrigerator door
aligns evenly with the top of the freezer drawer. Tighten all
screws.
4. Reconnect the wiring plug on top of the left-hand side
refrigerator door. Replace the top hinge covers.
C. Hinge Screws
C. 5/16" Hex-Head Hinge Screws
D. Top Hinge
C. Hinge Screws