Electrolux SB225 Notice D'utilisation page 15

12. L ay the refrigerator on soft foam
packaging or similar material. Remove
both adjustable bottom feet parts, and
remove the front feet fixed board and
the lower hinge part by unscrewing the
special flange self-tapping screws.
13. U nscrew the bottom hinge axis and fit
it to the hole which is side-by-side and
screw it in.
14. R eplace the lower hinge part to the left
side and fixing it with the special flange
self-tapping screws. Replace the front
feet fixed board to the other side and
fixing it with the special flange self-
tapping screws. Install the ajustable
bottom feet parts.
15. T ransfer the lower door to the property
position, adjust the lower hinge part,
put the hinge axis into the lower hole of
the lower door, then tighten the bolts.
16. U pturn the middle hinge part the
direction 180 degree, transfer it and
adjust its position. Put the middle hinge
axis into the upper hole of the lower
door, tighten the bolts.
17. T ransfer the upper door to the
appropriate position. Secure the door's
level; put the middle hinge axis into the
lower hole of the upper door.
ENGLISH 15