Electrolux SB225 Notice D'utilisation page 13

Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
WARNING!
It must be possible to
disconnect the appliance from
the mains power supply; the
plug must therefore be easily
accessible after installation.
9.3 Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power
supply.
The appliance must be earthed. The
power supply cable plug is provided with
a contact for this purpose If the domestic
power supply socket is not earthed,
connect the appliance to a separate earth
in compliance with current regulations,
consulting a qualified electrician.
The manufacturer declines all responsibility
if the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
9.4 Levelling
When placing the appliance ensure that it
stands leveled. This can be achieved by
two adjustable feet at the bottom in front.
9.5 Door reversibility
The side at which the door opens can be
changed from the right side (as supplied)
to the left side, if the installation site
requires. Tools you will need:
1. 8 mm socket driver.
2. Cross-shaped screwdriver.
3. Putty knife or thin-blade screwdriver.
Before you start lay the refrigerator on it's
back in order to gain access to the base,
you should rest it on soft foam packaging
or similar material to avoid damaging the
cooling pipes at the rear of the refrigerator.
ENGLISH 13