this by turning the adjustable feet clockwise (or counter-clockwise). This process
should be performed before the food is placed in the refrigerator.
• Before using your refrigerator, wipe all its parts with warm water in which you shall
add one teaspoon of food soda, then rinse it with clean water and dry it. After the
cleaning process is completed, place all the parts back.
Before Starting to Operate Your Refrigerator
• During the first operation or to ensure the efficient operation of
the device following the relocation processes, allow your
refrigerator to remain idle for 3 hours (in a vertical position),
then insert the plug to the socket. Otherwise, you may damage
the compressor.
• The first time you operate your refrigerator, an odor might be smelt. This odor shall
disappear once your refrigerator starts cooling.
Information on No-Frost technology
No-frost refrigerators differ from other static
refrigerators in their operating principle.
In normal fridges, the humidity entering the fridge due
to door openings and the humidity inherent in the food
causes freezing in the freezer department. To defrost
the frost and ice in the freezer compartment, you are
periodically required to turn off the fridge, place the
food that needs to be kept frozen in a separately cooled
container, and remove the ice gathered in the freezer
department.
The situation is completely different in no-frost fridges.
Dry and cold air is blown into the fridge and freezer
compartments homogeneously and evenly from several
points via a blower fan. Cold air dispersed
homogeneously and evenly between the shelves cools
all of your food equally and uniformly, thus preventing
humidity and freezing.
Therefore your no-frost fridge allows you ease of use,
in addition to its huge capacity and stylish appearance.
EN - 6 -