Super Freeze Mode
When would it be used?
• For freezing a large amount of food (too large to be fitted in the Super freezer).
• To freeze fast food.
• To freeze food quickly.
• To store seasonal food for a long time.
How would it be used?
• Press freezer set button until superfreeze lights up.
• If pressed on no button in 3 second, when "Superfreeze" is seen it will be set. Led
will blink 5 times and sound beep beep.
• Superfreeze symbol will be displayed during this mode.
• Maximum amount of fresh food (in kg) that can be frozen in 24 hours is indicated on
the appliance label.
• For optimum appliance performance to reach maximum freezing capacity, set active
SF mode 3 hours before placing fresh food in the freezer.
• Freezing process will be completed 24 hours after placing fresh foods in the freezer.
During this mode:
• If pushed freezer set button, super freze led blinks, if pressed on no button for 3
seconds, mode is cancelled and previous set value is set.
Note: "Super Freeze" mode will be automatically cancelled after 24 hours or freezer sensor
temperature is lower than -32 °C.
Freezer Temperature Settings
• Initial temperature value for Freezer Setting Indicator is -18°C.
• Press freezer set button once.
• When you first push this button, the last set value will blink on screen.
• Whenever you press on this button, lower temperature will be set. (-16°C, -18°C,
-20°C, superfreeze)
• When you push the freezer set button until superfreeze symbol appears on the Freezer
Setting Indicator, and if you do not push any button in 3 seconds Super Freeze will
flash.
• If you continue to press, it will restart from -16°C.
Warnings about Temperature Adjustments
• Your temperature adjustments will not be deleted when an energy breakdown occurs.
• It is not recommended that you operate your fridge in environments colder than 10°C
in terms of its efficiency.
• Temperature adjustments should be made according to the frequency of door
openings and the quantity of food kept inside the fridge.
• Do not pass to another adjustment before completing an adjustment.
EN - 8 -