Sinmag Europe LIFTO 60 Mode D'emploi page 16

7. CHARING THE BATTERIES
When the machine is used, the battery level decreases gradually. The current battery
voltage can be viewed on a tester (1) located on the panel. The actual voltage is shown
ENG
when the carriage performs no operation related to the bowl movement.
At the end of work or when the battery is discharged (the red indicator light located on the
power indicator 1 will turn on), it is recommended to connect the carriage for charging. For
this purpose, connect the attached cable to the socket (11) located at the bottom part of the
electric box of the carriage and to a 230V electric network.
Proper connection will be signalled by the active red indicator light (7) on the panel. This
means that the batteries are being charged. When the indicator light (7) turns green,
the battery is completely charged. The applied battery charger does not require to be
immediately unplugged after charging.
8