Dust Extraction - Storch 62 13 40 Mode D'emploi

Dust extraction

ATTENTION:
Hazardous dust can be produced during sanding operations:
Always connect an adequate extraction device.
In case of work producing dust, wear a mask.
Integrated extraction
- To guarantee optimal extraction of the powder empty the
conical filter (8) in time, accurately cleaning the filter holder
(8 a) and regularly cleaning the cartridge (8 b);
- During works on the vertical surfaces, position the machine
so the conical filter is turned downwards.
- Conical filter assembly: position the conical filter (8) on the
extractor tube coupling (4). Push the conical filter until it
stops.
- Conical filter filling testing: the filling status of the conical
filter is easily controlled using the transparent filter holder
(8 a).
- Conical filter cleaning: to empty the conical filter, remove
it from the extractor tube coupling working in the opposite
direction to assembly;
- Release the cartridge (8.b) and release it from the filter
holder;
- Empty the filter holder;
- Clean the cartridge plates with a soft brush.
Translation of the original instruction
85