Technical Data - Storch 62 13 40 Mode D'emploi

Technical data

Isolation class
Absorbed power
Electronic speed control
n0 idle
Orbital diameter
Pad dimension
Extraction system *
Dust extraction flow control
Weight
The values shown are based on a nominal voltage of 230 V
/ 50Hz. In the case of voltages and frequencies of different
power values may vary. Refer to the label technical specifi-
cations to the nominal values of the tool. (*) The tool must
be connected to a suitable dust extraction system (see Dust
extraction).
All information is without guarantee! Subject to technical
modifications and errors!
Translation of the original instruction
62 13 40
5.000 - 10.000 U/min.
Ø 150 mm
Self-suction (dust cartridge
in scope of supply). Optional
connection of a sanding
vacuum cleaner
76
II
450 W
yes
5 mm
no
2,1 kg