Storch 62 13 40 Mode D'emploi page 79

that is no damaged. After examining and installing an acces-
sory, all persons present, must keep a safe distance from the
rotating accessory and operate the tool at maximum empty
speed for one minute. Damaged accessories generally break
during this test period.
Use the electric tool only for dry sanding. The use of water
or other liquid coolants can cause electrocution or an electric
shock.
Do not operate the electrical tool in the proximity of flamma-
ble material. The sparks generated by sanding metal material
can ignite these materials.
Avoid the material to be processed or the grinding machine
overheating. Empty the dust filter cartridge before taking a
break. The grinding dust in the dust filter cartridge and in the
filter can ignite in adverse conditions, e.g. sparks when grin-
ding metal. Hazardous dust can be produced during sanding
operations, contact with which or inhalation can pose a danger
for the user's health and for people nearby. Comply with the
valid safety specifications in the respective countries.
Translation of the original instruction
79