Repair Service; Spare Parts; Technical Data - Grizzly ERV 1400-35 Traduction De La Notice D'utilisation Originale

GB
• Damage caused by material or manu-
facturer faults will be remedied free of
charge by replacement or repair.
• Claim for such damages by returning
the non-dismantled unit together with
its receipt slip and warranty card to
your dealer.

Repair Service

• Repairs that are not subject to this guar-
antee can be carried out by our Service
Center against a corresponding charge.
Our Service Center will be happy to sub-
mit a cost estimate.
We can only deal with implements that
have been adequately packed and car-
riage paid.
• Implements dispatched by unpaid
carriage – as bulky goods, by ex-
press or other special freight forms
– will not be accepted.
• We will dispose of your implements free
of charge

Spare parts

Spare parts and accessories can be
obtained at www.grizzly-service.eu.
If you do not have internet access, please
contact the Service Centre via telephone
(see "Service-Center"). Please have the
order number mentioned below ready.
Scarifier drum ........................... 91103570
Aerator drum..............................91103571
Collection bag ............................91103572
When ordering spare parts list the position
number indicated in the exploded view.
58

Technical data

Electric Scarifier / Aerator ERV 1400-35
Motor input.................................... 1400 W
Rated voltage ............. 230-240 V~, 50 Hz
Protection Class ................................
Degree of protection ..........................IPX4
Working width
Aerator drum .......................max. 35 cm
Scarifier drum ......................max. 35 cm
Working depth .......................max. 10 mm
Lawn bag volume .......................max. 40 l
Weight (without collection bag) ........8,6 kg
Acoustic pressure level
(L ) ................... 80 dB(A); K
pA
Sound power level (L
measured .......... 96 dB(A); K
guaranteed .............................. 99 dB(A)
Vibration at the handle (an) ....... 4,12 m/s
.................................................K=1,5 m/s
The noise and vibration values were
established by the standards and stipula-
tions listed in the Conformity Declaration.
Technical and visual changes can be
completed in the course of further devel-
opment without notification. Consequently,
all dimensions, references and details in
these Operating Instructions are without
guarantee. Consequently legal claims
based on these Operating Instructions
cannot be asserted.
=3 dB(A)
pA
)
WA
=3 dB(A)
wA
II
2
2