Maico AE 10/1 Instructions De Montage Et Mode D'emploi page 46

AE 10/1, AE 15/1
around the cable sheathing completely
and does not penetrate too far into
terminal compartment.
10. For an electrical surface-mounted con-
nection, drill the housing segment [12]
and use the cable entry when feeding in
the cable grommet [11]. Seal drill hole
used for surface mounting [12] on site, if
necessary.
11. Make the electrical connection
Chapter 9.
12. Fit cover unit (design cover [6] with
housing cover [5]) and engage it in safety
catch (lower arrow).
13. Setting closing angle
9 Electrical connection
● Danger of electric shock. Before working
on the unit's electrical connection, discon-
nect the unit at all poles from the power
supply (switch off mains fuse), secure
against being accidentally switched back
on and fit a visible warning sign.
●
DE
Chapter

UK
VENTILATOREN

11.
FR