Maico AE 10/1 Instructions De Montage Et Mode D'emploi page 43

AE 10/1, AE 15/1
catch (lower arrow).
12. Setting closing angle
The use of an
makes cable routing for surface-mounted
applications with AE 10/1 units possible.
For installation with ECA-DR spacing
frames, observe the respective mounting
instructions at
com.
8.2 Installation of AE 15/1
1. Unpack the AE 15/1.
2. Remove the cover unit (design cover [6]
with housing cover [5]). Unlock the safety
catch (lower arrow) with a screwdriver.
3. Insert housing [2] into wall break-
through/wall sleeve (TOP must be at
top).
DE
Chapter 11

ECA-DR spacing frame
www.maico-ventilatoren.
UK
VENTILATOREN
FR