Télécharger Imprimer la page

Maico AE 10/1 Instructions De Montage Et Mode D'emploi page 34

Publicité

Les langues disponibles

Les langues disponibles

AE 10/1, AE 15/1
• A mains isolation device with contact
openings of at least 3 mm at each pole is
mandatory.
• Only connect unit to a permanently
wired electrical installation with NYM-O/
NYM-J (0.75 mm² to 1.5 mm²) cables.
• The units may only be operated using
the voltage and frequency shown on the
rating plate.
• Perform the electrical connection in
accordance with the wiring diagram in
chapter
• The degree of protection stated on the
rating plate is only guaranteed if instal-
lation is undertaken correctly and if the
connecting cable is correctly guided into
the unit.
• Unit may also be energized when at a
standstill.
• Once maintenance and repair work is
complete, test the function.
● Exercise caution when handling packaging
materials. Observe applicable safety and
accident prevention requirements. Store
packaging material out of the reach of
children (risk of suffocation
DE
18.
UK
VENTILATOREN
due to swal-
FR

Publicité

loading

Ce manuel est également adapté pour:

Ae 15/1