Cleaning And Oiling - Singer Stylist II Serger Manuel D'instruction

CLEANING AND OILING

To keep the machine running smoothly, keep it clean and lubricated at all times.
FIRST DISCONNECT THE MACHINE FROM THE POWER SUPPLY BY REMOVING THE
POWER CORD PLUG FROM THE POWER SUPPLY OUTLET.
1. Open the front cover and working table. Using the brush provided, remove dust and ling
that has accumulated.
2. Apply a few drops of oil to the points indicated by arrows.
ALWAYS USE A GOOD QUALITY SEWING MACHINE OIL.
3. Using a screwdriver, remove the top cover. Use the brush to remove dust and lint.
Cleaning the serger and foot control
Keep the serger and foot control clean. Use dry rags to remove dust from the machine and foot
control.
NOTE: Use dry rags to avoid electrical shock.
I
Illustration * : Top cover screw
II
* : Top cover
* III : Brush
IV
* : Oil
60