Technical Data; Installation - AEG FAVORIT 55200VI Notice D'utilisation

Limescales particles on the
dishes
The dishes are wet and dull
There are streaks, milky spots
or a bluish coating on
glasses and dishes
Dry water drop signs on
glasses and dishes

TECHNICAL DATA

Dimensions
Electrical connection -
Voltage - Overall power
- Fuse
Water supply pressure
Capacity

INSTALLATION

WARNING!
Make sure that mains plug is disconnected from the mains socket during installation.
Fitting the appliance
Obey the instructions in the enclosed template to:
• Build-in the appliance.
• Install the furniture panel.
• Connect to the water supply and drain.
Remove all packaging before you move the dishwasher into position.
Put the appliance adjacent to a water tap and a drain.
When you put the appliance in place, make sure that the water hoses are not kinked or
squashed.
Install the appliance on a shelf in a furniture of the kitchen.
Make sure that:
• The furniture is correctly attached to the wall.
The cleaning results are not satisfactory
• The salt container is empty.
• The water softener is adjusted on a wrong level.
• The salt container cap is not closed correctly.
• No rinse aid has been used.
• The rinse aid dispenser is empty.
• Decrease the rinse aid dosage.
• Increase rinse aid dosage.
• The detergent can be the cause.
Width
Height
Depth
Information on the electrical connection is given on the rating plate on
the inner edge of the dishwasher door.
Minimum
Maximum
43
Technical data
54,5 cm
44,7 cm
49,4cm
0,8 bar (0,08 MPa)
10 bar (1,0 MPa)
6 place settings