Technical Data - AEG FAVORIT 54000 I Notice D'utilisation

Problem
The dishes are wet.
The dishes are wet and matt.
To activate the rinse aid dispenser
Make sure that the appliance is deactivated.
1. Press and hold the Multitab button.
2. Turn the programme knob counterclockwise until the programme marker is aligned
with the first washing programme on the control panel.
3. Release the Multitab button when the display shows the set level of the water softener.
4. Turn the programme knob counterclockwise until the programme marker is aligned
with the second washing programme on the control panel.
5. The display shows the set adjustment of the rinse aid dispenser.
6. Press the Multitab button, the display shows the new adjustment.
7. Deactivate the appliance to confirm the adjustment.

TECHNICAL DATA

Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
All manuals and user guides at all-guides.com
Possible cause
The detergent can be the cause. Use a different brand of deter-
The washing programme was
without a drying phase or
with a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on
(this function automatically
deactivates the rinse aid dis-
penser).
The rinse aid dispenser is deactivated
The rinse aid dispenser is activated
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
Technical data
Possible solution
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
596 mm
818-878 mm
575 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
47
12