Technical Data; Installation Instructions; Installation; Attaching The Appliance To The Adjacent Units - AEG FAVORIT 55010 VI Notice D'utilisation

Masquer les pouces Voir aussi pour FAVORIT 55010 VI:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

50

Technical data

Technical data
Dimensions
Electrical connection - Voltage
- Overall power - Fuse
Water supply pressure
Capacity

Installation instructions

Installation

WARNING!
Make sure that mains plug is disconnected from the mains socket during installation.
Obey the instructions in the enclosed template to:
• Build-in the appliance.
• Install the furniture panel.
• Connect to the water supply and drain.
Install the appliance under a counter (kitchen worktop or sink).
If a repair is necessary, the appliance must be easily accessible for the engineer.
Put the appliance adjacent to a water tap and a drain.
For the venting of the dishwasher only water fill, water drain and power supply cable
openings are necessary.
The dishwasher has adjustable feet to allow the adjustment of the height.
Make sure that the water inlet hose, the drain hose and the supply cable are not kinked or
squashed, when you insert the machine.

Attaching the appliance to the adjacent units

Make sure that the counter below which you attach the appliance is a safe structure (ad-
jacent kitchen units, cabinets, wall).

Adjusting the level of the appliance

Make sure that the appliance is level to close and seal the door correctly. If the level of the
appliance is correct, the door does not catch on the sides of the cabinet. If the door does
not close correctly, loosen or tighten the adjustable feet until the appliance is level.
Width cm
Height cm
Depth cm
Information on the electrical connection is given on the rating
plate on the inner edge of the dishwasher door.
Minimum
Maximum
Place settings
59,6
81,8 - 89,8
55
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
12

Publicité

Table des Matières
loading

Table des Matières