Technical Data; Environment Concerns - AEG FAVORIT 34030VI Notice D'utilisation

Problem
There are streaks, milky stains,
or a bluish layer on glasses
and dishes.
Dry water drop stains on
glasses and dishes.
The dishes are wet.
The dishes are wet and dull.

TECHNICAL DATA

Dimensions
Water supply pressure
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of the appliance door shows the electrical connection
data.
If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic
panels and aeolian), use a hot water supply to decrease energy consumption.

ENVIRONMENT CONCERNS

The symbol
be treated as household waste. Instead it should be taken to the appropriate collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed information about recycling of this
product, please contact your local council, your household waste disposal service or the
shop where you purchased the product.
Rinse aid dosage is too high.
Rinse aid dosage is too low.
The detergent can be the cause. Use a different brand of deter-
You have set a washing pro-
gramme without drying phase
or with a decreased drying
phase.
The rinse aid dispenser is emp-
ty.
Width
Height
Depth
Minimum
Maximum
1) Cold water or hot water
Place settings
on the product or on its packaging indicates that this product may not
Possible cause
Technical data
Possible solution
Decrease the rinse aid dosage.
Increase the rinse aid dosage.
gent.
Let the door stay ajar for some
minutes before you remove
the dishes.
Fill the rinse aid dispenser with
rinse aid.
818 - 878 mm
0,5 bar (0,05 MPa)
8 bar (0,8 MPa)
maximum 60 °C
45
596 mm
555 mm
12