Ce Declaration; Terms Of Guarantee - Menzer LHS 225 Vario Mode D'emploi

7. CE DECLARATION

We hereby declare that the machine described below complies with the relevant basic safety and health
requirements of the EU Directives, both in its basic design and construction as well as in the version put into
circulation by us. This declaration shall cease to be valid if the machine is modified without our prior approval.
Product: Long-Neck Sander
Type: MENZER LHS 225 VARIO
Relevant EU Directives
2004/108/EC
2006/42/EC
Applied harmonized standards
EN 55014-1: 2006 + A1: 2009
EN 55014-2: 1997 + A1: 2001 + A2: 2008
EN 61000-3-2: 2006 + A1: 2009 + A2: 2009
EN 61000-3-3: 2008
EN 60745-1: 2009
EN 60745-2-3: 2007 + A11: 2009
Applied national standards
-
Torsten Ceranski
Managing Director
Taucha, 01/09/2013
CGL GmbH
Straße des 17. Juni 4
04425 Taucha
Germany
10 EN

8. TERMS OF GUARANTEE

Upon buying a MENZER power tool, the customer is granted a 2-year Manufacturer's Warranty beginning
from the time the tool is purchased.
We guarantee that our power tools are free from defects in material or workmanship. Should this not be the
case, then, under the conditions of our Manufacturer's Warranty, we will undertake the repair or replace-
ment of defective parts free of charge. Any further entitlements on the part of the Purchaser – provided there
is no legal obligation – shall be excluded. Availing of warranty provisions does not bring about an extension
of the warranty term.
The MENZER Manufacturer's Warranty is only valid under the condition that the power tool is used in ac-
cordance with its operating instructions. A warranty claim is only valid when you, the Purchaser, send us
the power tool intact and in its original condition, within the warranty period and accompanied by a copy of
your proof of purchase. Power tools sent without pre-paid postage will not be accepted. Please note that
for logistical reasons, we cannot accept parcels without return labels or machines for which we have not
received a repair order. For all relevant information and to fill out a repair order form, please visit:
www.menzer-tools.com > Services
email: service@menzer-tools.com
phone: +49 342 98 74 14 15
This warranty only covers correct use of the power tool as is intended. The warranty excludes in particular:
• Parts subject to operational wear
• Defects resulting from improper use or disregard for operating instructions.
• Power tools that have been dismantled
• Damage caused by overloading the power tool
• Damage caused by use of additional and non-permitted, defective or incorrectly used tools
• Damage which is caused by the power tool
• Damage caused by the use of excessive or inappropriate force
• Damage which can be attributed to insufficient maintenance work or repairs carried out or
commissioned by the Purchaser or by a third party
• Damage caused by external influences, for example foreign objects
Warranty repairs may only be carried out at MENZER service workshops.
Your statutory and/or other agreed rights are unaffected by the granting of this warranty.
EN 11