3M DMS 700 Série Guide De L'utilisateur page 24

Basic Operations
Action Description
PIP Allows the user to turn the PIP function On or Off.
Picture In
Picture
PIP Input Allows the user to select which Input is to be displayed on the main channel:
7) VGA
8) Component
9) DVI-D
PIP Mode Allows the user to choose which PIP mode to display:
1) PIP (Picture-In-Picture)
2) PAP (Picture-and-Picture)
PIP Size Allows the user to choose the size of the PIP window:
1) Small
2) Medium
3) Large
PIP Adjusts the vertical and horizontal position of the projected PIP image.
Position Only VGA, DVI-D and DVI-A is Active.
PIP Allows the user to choose the position of the PIP window:
Location 1) Top left
2) Top right
3) Bottom left, Bottom right
Brightness Adjusts the brightness of the image. The higher the setting, the brighter the image. The lower the
setting, the darker the image.
Contrast Adjusts the degree of difference between the dark and light in the image. The higher the value,
the greater the contrast.
Tint Adjusts the balance of red-to-green necessary for realistic representation of video signals.
Color Adjusts the intensity of the Color in the image.
24
PIP Display sub menu
10) DVI-A
11) S-Video
12) Composite
Table 4: PIP sub menu function description
3M ™ Digital Media System 700 Series
3) POP (Picture-On-Picture)
© 3M 2007. All Rights Reserved.