GiBiDi BE12 Instructions Pour L'installation page 21

BE12
11 - JUMPER SW4
The settings are stored during the rest phase (gate closed).
The default settings are highlighted in the boxes with grey background.
JUMPER Function
FUNCTIONING
SW4
TERMINAL 21
12 - DIP SWITCH DIP3
In order to store the new settings It's necessary to power down and power up the control board.
The default settings are highlighted in the boxes with grey background.
DIP Function
START COMMAND
3_1
ALLOCATION TO
3_2
TRANSMITTER
BUTTON
PEDESTRIAN
COMMAND
ALLOCATION TO
TRANSMITTER
3_3
BUTTON
3_4
If this setting is the same as
DIP3_1 and DIP3_2,
PEDESTRIAN is disabled.
3_5
UNUSED
3_6
UNUSED
Status Description
N.C. devices are connected to STOP/EDGE (21) input
8,2KOhm (8K2) resistive devices are connected to STOP/EDGE (21) input.
Status
OFF
Transmitter button 1.
OFF
OFF
Transmitter button 2.
ON
ON
Transmitter button 3.
OFF
ON
Transmitter button 4.
ON
OFF
Transmitter button 1.
OFF
OFF
Transmitter button 2.
ON
ON
Transmitter button 3.
OFF
ON
Transmitter button 4.
ON
OFF Keep this OFF, do not change.
ON
OFF
Description
21
UK