GiBiDi BE12 Instructions Pour L'installation page 17

BE12
7 - PROTECTION FUSES
Position Value
F1 10A
F2 3,15A
F3 8A
2A
F4
8 - WARNING LEDs
Position Colour
L1 GREEN
L2 GREEN
L3 RED
L4 RED
L5 RED
L6 RED
L7 BLUE
Type
Protects battery power circuit.
F
Protects external accessories, electric lock and flashing light.
F
Protects the circuit board.
F
Protects the transformer.
F
Signal
Comes on when the START control is activated from the terminal board or the receiver.
START
Comes on when the PED control is activated from the terminal board or the receiver.
PED
PHOTO1 Always on. Comes off when the contact of terminal PHOTO 1 is opened.
PHOTO2 Always on. Comes off when the contact of terminal PHOTO 2 is opened.
Always on. Comes off when the resistance value of terminal SAFETY is wrong.
SAFETY
Always off, comes on when LEARN button is pressed.
RX
0,2s ON 0,2 OFF
30s ON
INFO
0,2s ON-4s OFF
0,2s ON - 0,2s OFF
0,2s ON - 4s OFF
Description
Description
The control board is locked, it's necessary to execute a new travel
learning procedure.
The control board is in pre-learning phase, aftre pressing MEMO
button.
During sleep time, the control board is set to work with MODO12-
MEKA BL12-ART3012 operator.
During sleep time, the control board is set to work with FLOOR812
operator.
17
UK