Installation - Thetford Marine TECMA Compact Line Manuel D'installation Et D'utilisation

3.4

Installation

1
1
Place 1 in permanent position; trace outline.
Materials not provided:
• In-line Strainer (if applicable)
• 3/4" - diameter water supply line (Raw Water installation)
• 3/4"- diameter minimum Vented Loop – if required (Raw Water installation)
• 1/2" - diameter water supply line (Fresh Water installation)
• 1-1/2"- diameter minimum Vented Loop – if required
• 1-1/2"- diameter Marine Discharge Hose
• 1-1/2"- straight or 90O coupling (as needed)
• Silicone caulk (white or clear)
• Various Electrical Connectors
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
2
Attach Water Supply
■ Fresh Water Installations -
refer to the Solenoid Harness and Acces-
sory
Kit instructions
■ Raw Water Installations -
refer to the Pump Harness and
Accessory Kit instructions
45
Compact line | Installation and use manual | ENG
3
H
3-1/2" 1(x)
Locate F and H ; cut hole
www.thetfordmarine.com
F
T +39 0744 709071
F +39 0744 719833
info@tecma.eu