Tank Level Led - Block Function; Lockout - Thetford Marine TECMA Compact Line Manuel D'installation Et D'utilisation

Tank level LED – Block function
The control panel is equipped with a 3-colour LED, which indicates the blackwater tank level.
As soon as the maximum level is reached, the sensor disables the inlet of water inside the
bowl. Only the macerator pump will stay active.

Lockout

If for any reason you intend to bypass the block function connected to the level of the black
water tank, and reactivate the inlet of water, press both buttons simultaneously two times,
with an interval of about 1 sec.
The "LOCK OUT" LED will come on to indicate that the panel is in lockout mode (block NOT
active). The button LEDs will turn off during programming. When restarted, the control unit
can be used.
Block Active
To disable the lockout function, repeat the procedure:
Block NOT Active
Tecma S.r.l.
Via Flaminia | Loc. Castello delle Formiche
05030 Otricoli (TR)
ITALY
x 2
x 2
53
Compact line | Installation and use manual | ENG
x 2
Block NOT Active
x 2
Block Active
T +39 0744 709071
F +39 0744 719833
info@tecma.eu
www.thetfordmarine.com