Skil AG290201 Guide D'utilisation page 16

To Attach/Detach Battery Pack
(Fig. 7)
Be careful not to turn on the tool when
attaching the battery pack.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves in the tool, and then slide the battery
pack onto the tool.
To detach the battery pack:
Depress the battery-release button located
on the front of the battery pack to release the
battery pack. Pull the battery pack out and
remove it from the tool.
NOTICE: When placing the battery pack on the
tool, be sure that the raised rib on the battery pack aligns with the groove inside the tool and
that the latches snap into place properly. Improper attachment of the battery pack can cause
damage to internal components.
WARNING
16
Battery tools are always in operating condition. Be careful when the
tool is not in use or when carrying it at your side.
Fig. 7
Battery-
Release
Button
Attach
Detach