Warranty; 12.1 Scope Of Manufacturer's Warranty - Truma iNet X Mode D'emploi

WARRANTY

Dimensions
120,1
Fig� 5
The dimensions are in mm� Illustration not to scale�
Interference resistance
This device corresponds to Section 15 of the FCC reg-
ulations and the RSS standards of Industry Canada for
licence-exempt radio devices� For operation, the follow-
ing conditions must be fulfilled:
(1) The device must not cause any damaging interference�
(2) The device must be immune to interference, also in-
terference that could cause unwanted operating states�
30 EN
12
Manufacturer's Warranty
31
(European Union)

12.1 Scope of Manufacturer's Warranty

As the Manufacturer of the appliance, Truma under-
takes a warranty towards the Consumer that covers
any material and / or manufacturing defects of the
appliance�
This warranty is applicable in EU member states as
well as the United Kingdom, Iceland, Norway, Switzer-
land and Turkey A Consumer is the natural person who
was the first one to purchase the appliance from the
9
Manufacturer, OEM or dealer and who neither resold
the appliance in a commercial or self-employed profes-
sional capacity nor installed it for a third party in such a
capacity�
The Manufacturer's Warranty covers any of the afore-
mentioned defects that occur within 24 months upon
concluding the purchase agreement between the
seller and the Consumer� The Manufacturer or an au-
thorised service partner undertakes to remedy such
defects through subsequent fulfilment, i�e� at its dis-
cretion either by repairing or replacing the defective
item� Defective parts shall become the property of the
Truma iNet X Panel / Truma iNet X Pro Panel
WARRANTY
47000-00083 · 01 · 11/2021