Faults - Truma iNet X Mode D'emploi

Truma iNet X Panel / Truma iNet X Pro Panel
Several different mobile devices can be stored in the
control panel� The stored mobile devices can be man-
aged via the control panel�
Up to 3 mobile devices can be connected to the control
panel simultaneously and be used to control appliances�
Connecting a mobile device with the control
panel
Mobile devices are connected to the control panel via
Bluetooth� For this to function, the mobile device must
be within the range of the control panel�
Enable Bluetooth on the mobile device�
If you have any questions with regard to the settings
of the mobile device, contact the manufacturer�
Follow the instructions from the setup wizard on
the display and the app instructions on the mobile
device�
47000-00083 · 01 · 11/2021
6

Faults

Listed below are some actions that can be taken to
rectify faults� If the measures taken are unsuccessful,
please contact TrumaService for Truma devices – for
devices made by other manufacturers, please refer to
the relevant service department�
Control panel cannot be switched on.
12 V Check power supply�
Check the fuses of the power supply in the vehicle
and replace if necessary�
Error messages
If a fault occurs in a connected appliance, this is

shown on the control panel� Solutions to rectify the
fault are suggested in the display�
Resetting faults
Follow the instructions on the display�
Acknowledge faults on the control panel�
App problems
If you encounter problems with the app, check that you
have the latest version and, if not, update it�
Faults
EN 27