Version Information; Correcting The Color Characteristics (Color Space Converter) - Sony SRX-S110 Manuel D'installation

For details on the procedures, see "Correcting the Color
Characteristics (Color Space Converter)" on page 29.

VERSION INFORMATION

Displays the version information on this projector.
Correcting the Color
Characteristics (Color
Space Converter)
The color characteristics of the projector can be corrected
after the measurement of its luminance, chromaticity, etc.
by using the Konica Minolta CL-200 Chroma Meter, etc.
Open the SERVICE window (page 28) and use the items
in "COLOR SPACE CONVERTER" as illustrated below.
1,6,11,16
12
1
Select "Gray 10" from the Test Pattern drop-down list
to display the test pattern.
2
Open the COLOR/FRAME window (page 25) and
select the color temperature.
When you adjust the color space "709": Select
"6500" from the Color Temp drop-down list of
"Color" under "Input A."
When you adjust the color space "DCDM": Select
"DCI W/P" from the Color Temp drop-down list of
"Color" under "Input A."
3
Open the SERVICE window (page 28) and click the
709 or DCDM radio button for "Color Space" to select
the color space you want to adjust.
4
Click the RESET button.
Resetting the color space converter function allows
you to make a measurement of the projector's color
characteristics.
5
Measure the luminance of the picture, and adjust it.
1 Use the Chroma Meter to make a measurement of
the luminance of the center of the picture.

Correcting the Color Characteristics (Color Space Converter)

3 14
10 13 4
29