Owner Information; Date & Time; Network - Sony SRX-S110 Manuel D'installation

Owner Information

The Owner Information window is used to set information
on this projector.
Owner
Name: Enter the name of an owner of the projector.
Organization: Enter the name of an organization.
Projector
Region: Enter the region where the projector is used.
Location: Enter the location where the projector is
installed.
Name: Enter the desired name.
Memo: Use to enter notes.
Date & Time
The Date & Time window is used to set the current date
and time.
Time Zone
Sets the time difference in the area where the projector is
installed. Select the time zone from the drop-down list
displayed by clicking .
Adjust clock for daylight saving changes: When you
click the check box, the clock is automatically
adjusted according to the daylight saving time of the
selected time zone.
Date/Time
Clicking on the date text box displays a calendar. Set
the current date using the calendar.
To set the current time, click the hour or minute in the time
text box and set it by clicking .
Time Server (NTP Server)
Enter the IP address of the NTP server.

Network

The Network window is used to configure the network
setting for the projector.
Internet Protocol (TCP/IP)
Sets the IP address of the projector.
Click either radio button.
Obtain an IP address automatically (DHCP): Click
when you obtain an IP address automatically from a
DHCP server.
Specify an IP address: Click when you specify a fixed IP
address. Sets the following items.
IP address: Enter the IP address of the projector.
Subnet Mask: Enter the subnet mask.
Default Gateway: Enter the default gateway.
Primary DNS: Enter the IP address of a primary
DNS server.
Secondary IP address: Enter the IP address of a
secondary DNS server.
Ethernet
MAC address: Displays the MAC address of the
projector.
Speed: Sets the link speed of Ethernet. Select from the
drop-down list displayed by clicking .
11
Setting Up the Projector