Technical Description - Anselmo Cola TERMOFIRE L Manuel D'installation, D'utilisation Et D'entretien

1.4 Technical description

The insert works exclusively on pellets, providing healthy and safe heat in the room. Its automatic control systems
ensure optimum heat output and complete combustion; there are also safety systems to guarantee safe operation for
the unit's parts and for the user.
When correctly installed, the unit works with any outside climatic conditions, and in any case in critical conditions
(strong wind, frost, etc.) the safety systems can intervene, shutting it down.
The inserts model TERMOFIRE L with nominal power of 23.5 kW guarantee a maximum heatable volume of 588 m3
considering a coefficient of the building's energy demand equal to 35 W/m3. It can vary depending on the insulation,
type and climatic zone.
For technical data, refer to the table on page 5.
Key:
A - Power cable connection
B - Combustion air inlet
C - Water drain in overpressure (1/2" female)
D - Water supply connection
E - System return (3/4" male)
F - System delivery (3/4" male)
G - Flue pipe connection Ø80mm
L - Turbulator shaker knobs
34 TERMOFIRE L