Husqvarna 330i Manuel D'utilisation page 7

Masquer les pouces Voir aussi pour 330i:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

give you information about training materials and
classes that are available.
You must understand the effects of kickback and
how to prevent them before you use this product.
What is kickback? on page 16 and Common
See
questions about kickback on page 17 for
instructions.
Do not use a product, battery or battery charger that
is defective.
Do not touch a rotating saw chain. It can cause
serious injuries of death.
Do not use the product if you are tired, while under
the influence of alcohol or drugs, medicine or
anything that could have a negative effect on your
vision, alertness, coordination or judgment.
Working in bad weather is tiring and often brings
added risk. Due to the added risk, it is not
recommended to use the machine in very bad
weather, for instance in dense fog, heavy rain,
strong winds, intense cold, risk of lightning, etc.
Do not start a product unless the guide bar, saw
chain and all covers are assembled correctly. If not,
the drive sprocket can come loose and cause
serious injuries. See
instructions.
Look around you. Make sure that there is no risk that
persons or animals touch or influence on your
control of the product.
Do not let children use or be near the product. The
product is easy to start and children may be able to
start it if they are not fully supervised. This can mean
a risk of serious injury.
Remove the battery when you do not have full view
of the product or leave the product for any length of
time.
958 - 001 - 16.11.2018
Assembly on page 12 for
You must be stable on your feet in order to have full
control of the product. Do not use the product if you
are on a ladder or in a tree. Do not use the product if
you are not on stable ground.
If you are not careful, the risk of kickback increases.
A kickback can occur if the kickback zone of the
guide bar accidentally touches a branch, tree or
other objects.
Do not hold the product with one hand. This product
is not safely controlled with one hand.
Do not use the product above shoulder height and
do not try to cut with the guide bar tip.
Do not use a product in a situation where you can
not call for help if an accident occur.
Stop the product and engage the chain brake before
you move the product. Hold the product with the
guide bar and saw chain pointing rearward. Put on a
transportation guard on the guide bar before
transportation or before you move it for any distance.
When you put the product on the ground, engage the
chain brake and have a constant view of the product.
Stop the product and remove the battery before you
leave your product for any length of time.
There is a risk that wood chips get stuck in the drive
system. This can cause the saw chain to get stuck.
Always stop the product and remove the battery
before you clean it.
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

535i xp330i xp

Table des Matières