DESCRIPTION OF CODES WINDOW (13)
The Codes window allows you to create a list of registers where the various types of code
are stored: the programming codes of the telephones/monitors, call codes, and door-opening
codes.
27- Exterior panel
Select this option if the panel is for an
external point of entry to a housing
compound.
28- Interior panel
Select this option the panel is for an
internal point of entry in a housing
compound or for a building. Select the
number of digits in the programming
codes (3 or 4 digits).
29- Code fields
Programming code: Internal code of
telephones/connection brackets.
Call code: Code for calling.
Door-opening code: Code for opening
the door.
27
28
30- Delete button (
This deletes the selected register in the
list of codes.
31- Add button (
This adds a new register to the list.
32- OK button (
This saves any changes made to the list
of codes.
33- List of code registers
This shows the list of registers which
contain the programming codes of the
telephones/monitors, the call codes and
the door-opening codes.
34- Error message area.
Error messages are shown here.
29
30
31
32
33
34
)
)
)