Alcad PDK-54910 Manuel D'utilisation page 28

LIST OF RESIDENT REGISTERS
The first names and surnames of the residents of the installation are stored in the list of resident
registers. Each register consists of 2 first names and 2 surnames. Store the first names and
surnames of persons who live in the same dwelling in a single register.
Note: For a register to be valid, you must at least fill in the field “Surname 1”.
HOW TO CREATE A NEW REGISTER IN THE LIST OF RESIDENT REGISTERS
To create a new element in the list of resident registers, press the Add button (
the first names and surnames in the text fields (21). Then press the OK button (
and save the changes. If the register is incorrect, an error message (26) will be displayed.
HOW TO MODIFY A REGISTER IN THE LIST OF RESIDENT REGISTERS
In order to modify a register, select it in the list by left-clicking on it with the mouse. Next make
the desired changes in the appropriate text field (21). Then press the OK button (
confirm and to save the changes. If the register is not correct, an error message will be shown
(26).
HOW TO DELETE A REGISTER FROM THE LIST OF RESIDENT REGISTERS
To delete a register, select it in the list by left-clicking on it with the mouse. Then press the
Delete button ( ). The register will immediately be deleted.
Important: This action cannot be undone:
elements deleted from the list cannot be
recovered. Be particularly careful, therefore,
when using this feature.
). Next, type
) to confirm
) to