INSTALLATION WITH 2 POINTS OF ENTRY............................................................................................................................................. 9
ESTATE 3 BUILDINGS. 1 EXTERNAL ENTRY POINT .............................................................................................................................................11
DIGITAL VIDEO DOOR ENTRY SYSTEMS VIDEO DOOR ENTRY SYSTEMS WITH KEYPAD UNIT DIGITAL MONITOR DIGITAL TELEPHONE ENTRANCE PANEL WITH KEYPAD ENTRANCE PANEL WITH DIRECTORY INDEX DESCRIPTION ....................................... 3 OPERATION OF THE DIGITAL SYSTEM WITH KEYPAD..........................5 BASIC INSTALLATION ................................... 7 INSTALLATION WITH 2 POINTS OF ENTRY............................. 9 ESTATE 3 BUILDINGS.
DIGITAL VIDEO DOOR ENTRY SYSTEMS DESCRIPTION System whereby the entrance panel incorporates a numeric keypad (1) which enables the user to call the monitor/telephone in a flat by keying in a code previously assigned to the device (Programming the device). It also incorporates a numeric display (2) which shows the visitor the code which has been keyed in.
DIGITAL VIDEO DOOR ENTRY SYSTEMS OPERATION OF THE DIGITAL SYSTEM WITH KEYPAD MAKING A CALL TO A FLAT To make a call to a flat, key in its code on the keypad of the entrance panel. The number of digits which must be keyed in will depend on the value which has been configured in the entrance panel (Position 8 from the configuration menu, pages 26, 27 and 28).
Page 6
DIGITAL VIDEO DOOR ENTRY SYSTEMS THE LOOPED AUTO-SWITCH-ON FUNCTION e door without having received a call. In installations with several points of entry this function can be activated sequentially in the different entrance panels of the installation (looped auto-switch-on), by repeatedly pressing the auto-switch-on button. Thus (See picture below), when the auto- switch-on button is first pressed, the main entrance panel will be activated (P);...
DIGITAL VIDEO DOOR ENTRY SYSTEMS BASIC INSTALLATION SINGLE-WIRED DIAGRAM SECTION TABLE Up to 100 m - Up to 25 m - Operation Configure the panel as the main entrance panel (P). (See page 26) The function activating the electric lock from the entrance panel remains enabled at all times. SYSTEM ON STANDBY The monitors are inactive (communication with the entrance panel and door opening functions are disabled).
Page 8
DIGITAL VIDEO DOOR ENTRY SYSTEMS BASIC INSTALLATION - White Earth Note: To connect the entrance panel with directory, see "How to connect PTN-00000", page 17.
DIGITAL VIDEO DOOR ENTRY SYSTEMS INSTALLATION WITH 2 POINTS OF ENTRY - SINGLE-WIRED DIAGRAM SECTION TABLE Up to 100 m - Up to 25 m - Operation Configure one of the entrance panels as the main panel (See page 26) Configure the remaining panels as secondary panels (See page 27).
Page 10
DIGITAL VIDEO DOOR ENTRY SYSTEMS INSTALLATION WITH 2 POINTS OF ENTRY - Note: To connect the entrance panel with directory, see "How to connect PTN-00000", page 17. White White White White Earth Earth...
DIGITAL VIDEO DOOR ENTRY SYSTEMS ESTATE 3 BUILDINGS. 1 EXTERNAL ENTRY POINT SINGLE-WIRED DIAGRAM BUILDING 1 BUILDING 2 BUILDING 3 SECTION TABLE Up to 100 m - Up to 25 m - EXTERNAL ENTRY POINT...
Page 12
DIGITAL DOOR ENTRY SYSTEMS Operation Configure the entrance panel of the external entry point as the external panel (E) (See page 28). Configure the entrance panel of each building as the main panel (P) (See page 26). The function activating the electric lock from the entrance panels remains enabled at all times. SYSTEM ON STANDBY The monitors are inactive (communication with the entrance panel and door opening functions are disabled).
Page 13
DIGITAL VIDEO DOOR ENTRY SYSTEMS ESTATE 3 BUILDINGS. 1 EXTERNAL ENTRY POINT BUILDING 1 - BUILDING 2 - BUILDING 3 - Earth Earth Main entrance panel White White External entrance panel White White Earth Earth Note: To connect the entrance panel with directory, see "How to connect PTN-00000", page 17.
DIGITAL VIDEO DOOR ENTRY SYSTEMS ESTATE 3 BUILDINGS, PUSH-BUTTONS. 1 EXTERNAL ENTRY POINT SINGLE-WIRED DIAGRAM BUILDING 1 BUILDING 2 BUILDING 3 SECTION TABLE Up to 100 m - Up to 25 m - EXTERNAL ENTRY POINT...
Page 15
DIGITAL DOOR ENTRY SYSTEMS Operation Configure the entrance panel of the external entry point as the external panel (E) (See page 28). Configure the entrance panel of each building as the main panel (Leave the J1 jumper installed). The function activating the electric lock from the external entrance panel remains enabled at all times. SYSTEM ON STANDBY The monitors are inactive (communication with the entrance panel and door opening functions are disabled).
Page 16
DIGITAL VIDEO DOOR ENTRY SYSTEMS ESTATE 3 BUILDINGS, PUSH-BUTTONS. 1 EXTERNAL ENTRY POINT BUILDING 1 - BUILDING 2 - BUILDING 3 - Earth Earth Main entrance panel White White GRF-108 cod. 9610009 White External entrance panel White Earth Earth Note: To connect the entrance panel with directory, see "How to connect PTN-00000", page 17.
DIGITAL DOOR ENTRY SYSTEMS CONNECTION INSTRUCTIONS HOW TO CONNECT PTN-00000 The connections corresponding to the lighting of the card-holders of the entrance panel with directory can be performed in two different ways: Continuous lighting of the panel with directory Turning on the lighting by pressing any key on the entrance panel Note: The length of time that the lighting remains on will depend on the value that has been configured for relay 2.
Page 18
DIGITAL VIDEO DOOR ENTRY SYSTEMS HOW TO CONNECT TCB-011 For installations with several points of entry, extract the resistence from the terminals (V2, M) where the coaxial cable is to be connected (steps 1 and 2). Conducteur interne Mesh Video unit (Installations with several points of entry) Video unit (Installation with several points of entry) Splitter (Estate external entry point) Basic installation...
Page 19
DIGITAL VIDEO DOOR ENTRY SYSTEMS HOW TO CONNECT GRF-211 Video unit White Monitors/Telephones Power supply Audio unit Audio unit (Installation with several points (Installation with several points of entry) of entry) Numeric keypad Audio unit (Estates) TERMINALS Power supply voltage - Tension Telephones BUS Panels BUS Estates BUS...
Page 20
DIGITAL VIDEO DOOR ENTRY SYSTEMS HOW TO CONNECT KPD-001 Audio unit Power supply Electric lock - Relay 1 Relay 2 Connection Activation Connection Activation Connection Activation Additional Elements Additional Elements - From the dwelling By pressing each key Using external pushbuttons Only in the case of telephones TERMINALS Power supply...
DIGITAL VIDEO DOOR ENTRY SYSTEMS INSTALLING AND ADJUSTMENT INSTRUCTIONS Once the flush-mounted box has been put in place, remove the reinforcement. Remove the protecting plugs and the fixing pins from the flush-mounted box. Choose the two fixing pins you want to hinge the panel on to, so that it opens either to the right or to the left or downwards.
Page 22
DIGITAL VIDEO DOOR ENTRY SYSTEMS Adjust the video unit's view angle until getting the desired orientation. Separate the upper and lower decorative fittings, by loosening the clamping screws. Tighten the upper and lower decorative Close the panel, press it against the fittings.
DIGITAL VIDEO DOOR ENTRY SYSTEMS ENTRANCE PANEL CONFIGURATION INSTRUCTIONS DESCRIPTION - To configure the entrance panel, a configuration menu is available. This menu is accessed from the keypad of the entrance panel itself by keying in the MASTER code. The entrance panel leaves the factory with a default MASTER code which allows access to the menu. It is possible to change this code inside the configuration menu (Position 19 from the configuration menu).
Page 24
MASTER code which you have previously configured. The panel will emit a beep. The display will show the text ALCAd before going to position 1 of the menu. If the code is incorrect, the panel will emit a beep indicating that an error has been made and the red LED will flash. Begin again at step 1.
Page 25
DIGITAL VIDEO DOOR ENTRY SYSTEMS CONFIGURATION OF THE ENTRANCE PANEL ACCORDING THE INSTALLATION BASIC INSTALLATION See "Configuration of the main entrance panel", page 26 INSTALATION WITH SEVERAL POINTS OF ENTRY Note: Determine the main entrance panel; panel from which the monitors/telephones will be programmed. See "Configuration of the main entrance panel", page 26 Main entrance panel Remaining panels...
Page 26
DIGITAL VIDEO DOOR ENTRY SYSTEMS CONFIGURATION OF THE MAIN ENTRANCE PANEL (P) Position Description Default value Value to be chosen Definition of panel as main panel Panel number Number of secondary panels with video unit in the building Type of call tone (type 1 or type 2) Number of times call tone is repeated Maximum time setting for conversation (seconds) Time setting to answer call (seconds)
Page 27
DIGITAL VIDEO DOOR ENTRY SYSTEMS CONFIGURATION OF THE SECONDARY ENTRANCE PANEL (S) Position Description Default value Value to be chosen Definition of panel as secondary panel Panel number Number assigned to the main panel of the building Type of call tone (type 1 or type 2) Number of times call tone is repeated Maximum time setting for conversation (seconds) Time setting to answer call (seconds)
Page 28
DIGITAL VIDEO DOOR ENTRY SYSTEMS CONFIGURATION OF EXTERNAL ENTRANCE PANEL (E) Position Description Default val Value to be chosen Definition of panel as external entrance panel Definition of external panel as main or secondary entrance panel Number of buildings in the estate Type of call tone (type 1 or type 2) Number of times call tone is repeated Maximum time setting for conversation (seconds)
DIGITAL VIDEO DOOR ENTRY SYSTEMS TECHNICAL CHARACTERISTICS VIDEO UNIT TCB-011 TERMINALS INACTIVE WORKING (1) In cases of several points of entry, when any entrance panel video unit is activated. (2) Estates, when the external entrance panel video unit is activated. Operating temperature - AUDIO UNIT GRF-211 TERMINALS...
Page 30
DIGITAL DOOR ENTRY SYSTEMS NUMERICAL KEYPAD KPD-001 TERMINALS INACTIVE AT REST WORKING Operating temperature - STATE OF THE CONTACTS OF THE RELAYS 1 AND 2 IN RELATION TO THE CONTROL SIGNAL RELAY 1 RELAY 2 TERMINALS VALUES TERMINALS VALUES Operating temperature - Note: Reference values are provided only to enable the checking of equipment.
DIGITAL DOOR ENTRY SYSTEMS TROUBLE SHOOTING Ensure that the entrance panels of the installation are correctly configured. The text F1 flashes in the display To do so, check that the values selected in the different positions of the Check the connection between the numerical keypad and the audio unit. configuration menu are the same as those shown in the section entitled If no fault is detected, there may be something wrong with the numerical Configuration of the entrance panel according the installation, see page...
Page 33
DIGITAL DOOR ENTRY SYSTEMS In estate installations, making a call from one of the external entrance Check coaxial connection in splitters and tap-offs. If you cannot find the panels does not disable the entrance panels of the building which is being fault, there may be something wrong with the video unit.