INSTALLATION WITH 2 POINTS OF ENTRY............................................................................................................................................. 9
DIGITAL VIDEO DOOR ENTRY SYSTEMS VIDEO DOOR ENTRY SYSTEMS WITH KEYPAD UNIT DIGITAL MONITOR DIGITAL MONITOR/TELEPHONE ENTRANCE PANEL WITH KEYPAD ENTRANCE PANEL WITH DIRECTORY INDEX DESCRIPTION ....................................... 3 OPERATION OF THE DIGITAL SYSTEM WITH KEYPAD..........................5 BASIC INSTALLATION ................................... 7 INSTALLATION WITH 2 POINTS OF ENTRY............................. 9 ESTATE, 3 BUILDINGS ..................................11 CONNECTION INSTRUCTIONS ................................14 INSTALLING AND ADJUSTMENT INSTRUCTIONS ..........................
To configure the entrance panel, a configuration menu is available. This menu is accessed from the keypad of the entrance panel itself. 9800035 PDK-41400 ENTRANCE PANEL WITH DIGITAL AUDIO UNIT, B/W VIDEO UNIT TWISTED PAIR, NUMERIC DISPLAY AND KEYPAD ndividual exterior entrance panel for digital door entry system installations. Houses the GRF-211 audio unit, the TCB-040 video unit and the KPD-001 numeric keypad.
DIGITAL VIDEO DOOR ENTRY SYSTEMS OPERATION OF THE DIGITAL SYSTEM WITH KEYPAD MAKING A CALL TO A FLAT To make a call to a flat, key in its code on the keypad of the entrance panel. The number of digits which must be keyed in will depend on the value which has been configured in the entrance panel (Position 8 from the configuration menu).
Page 6
DIGITAL VIDEO DOOR ENTRY SYSTEMS THE LOOPED AUTO-SWITCH-ON FUNCTION e door without having received a call. In installations with several points of entry and in housing estates, this function can be activated sequentially in the different entrance panels of the installation (looped auto-switch-on), by repeatedly pressing the auto- switch-on button.
DIGITAL VIDEO DOOR ENTRY SYSTEMS BASIC INSTALLATION SINGLE-WIRED DIAGRAM SECTION TABLE Up to 100 m - Up to 25 m - TWISTED PAIR Operation Configure the panel as the main entrance panel (P). (See page 23) The function activating the electric lock from the entrance panel remains enabled at all times. SYSTEM ON STANDBY The monitors are inactive (communication with the entrance panel and door opening functions are disabled).
Page 8
DIGITAL VIDEO DOOR ENTRY SYSTEMS BASIC INSTALLATION - Earth Note: To connect the entrance panel with directory, see "How to connect PTN-00000", page 14.
DIGITAL VIDEO DOOR ENTRY SYSTEMS INSTALLATION WITH 2 POINTS OF ENTRY - SINGLE-WIRED DIAGRAM SECTION TABLE Up to 100 m - Up to 25 m - TWISTED PAIR Operation Configure one of the entrance panels as the main panel (See page 23) Configure the remaining panels as secondary panels (See page 24).
Page 10
DIGITAL VIDEO DOOR ENTRY SYSTEMS INSTALLATION WITH 2 POINTS OF ENTRY - Earth Earth Note: To connect the entrance panel with directory, see "How to connect PTN-00000", page 14.
DIGITAL VIDEO DOOR ENTRY SYSTEMS ESTATE, 3 BUILDINGS SINGLE-WIRED DIAGRAM SECTION TABLE Up to 100 m - Up to 25 m - BUILDING 1 BUILDING 2 BUILDING 3 TWISTED PAIR TWISTED PAIR TWISTED PAIR EXTERIOR ENTRANCE...
Page 12
DIGITAL DOOR ENTRY SYSTEMS Operation Configure the entrance panel of the external entry point as the external panel (E) (See page 25). Configure the entrance panel of each building as the main panel (P) (See page 23). The function activating the electric lock from the entrance panels remains enabled at all times. SYSTEM ON STANDBY The monitors are inactive (communication with the entrance panel and door opening functions are disabled).
Page 13
DIGITAL VIDEO DOOR ENTRY SYSTEMS ESTATE, 3 BUILDINGS BUILDING 1 BUILDING 2 BUILDING 3 Earth Earth Main entrance panel Exterior entrance entrance panel Earth Earth Note: To connect the entrance panel with directory, see "How to connect PTN-00000", page 14.
DIGITAL DOOR ENTRY SYSTEMS CONNECTION INSTRUCTIONS HOW TO CONNECT PTN-00000 The connections corresponding to the lighting of the card-holders of the entrance panel with directory can be performed in two different ways: Continuous lighting of the panel with directory Turning on the lighting by pressing any key on the entrance panel Note: The length of time that the lighting remains on will depend on the value that has been configured for relay 2.
Page 15
DIGITAL VIDEO DOOR ENTRY SYSTEMS HOW TO CONNECT TCB-040, TCB-050 For installations with several points of entry, extract the resistence from the terminals (T2+,T2 ) where the twisted pair cable is to be connected (steps 1 and 2). TERMINALS...
Page 16
DIGITAL VIDEO DOOR ENTRY SYSTEMS HOW TO CONNECT GRF-211 Video unit White Monitors/Telephones Power supply Audio unit Audio unit (Installation with several points (Installation with several points of entry) of entry) Numeric keypad Audio unit (Estates) TERMINALS Power supply voltage - Tension Telephones BUS Panels BUS Estates BUS...
Page 17
DIGITAL VIDEO DOOR ENTRY SYSTEMS HOW TO CONNECT KPD-001 Audio unit Power supply Electric lock - Relay 1 Relay 2 Connection Activation Connection Activation Connection Activation Additional Elements Additional Elements - From the dwelling By pressing each key Using external pushbuttons Only in the case of telephones TERMINALS Power supply...
DIGITAL VIDEO DOOR ENTRY SYSTEMS INSTALLING AND ADJUSTMENT INSTRUCTIONS Once the flush-mounted box has been put in place, remove the reinforcement. Remove the protecting plugs and the fixing pins from the flush-mounted box. Choose the two fixing pins you want to hinge the panel on to, so that it opens either to the right or to the left or downwards.
Page 19
DIGITAL VIDEO DOOR ENTRY SYSTEMS Adjust the video unit's view angle until getting the desired orientation. Separate the upper and lower decorative fittings, by loosening the clamping screws. Tighten the upper and lower decorative Close the panel, press it against the fittings.
DIGITAL VIDEO DOOR ENTRY SYSTEMS ENTRANCE PANEL CONFIGURATION INSTRUCTIONS DESCRIPTION - To configure the entrance panel, a configuration menu is available. This menu is accessed from the keypad of the entrance panel itself by keying in the MASTER code. The entrance panel leaves the factory with a default MASTER code which allows access to the menu. It is possible to change this code inside the configuration menu (Position 19 from the configuration menu).
Page 21
MASTER code which you have previously configured. The panel will emit a beep. The display will show the text ALCAd before going to position 1 of the menu. If the code is incorrect, the panel will emit a beep indicating that an error has been made and the red led will flash. Begin again at step 1.
Page 22
DIGITAL VIDEO DOOR ENTRY SYSTEMS CONFIGURATION OF THE ENTRANCE PANEL ACCORDING THE INSTALLATION BASIC INSTALLATION See "Configuration of the main entrance panel", page 23 INSTALATION WITH SEVERAL POINTS OF ENTRY Note: Determine the main entrance panel; panel from which the monitors/telephones will be programmed. See "Configuration of the main entrance panel", page 23 Main entrance panel Remaining panels...
Page 23
DIGITAL VIDEO DOOR ENTRY SYSTEMS CONFIGURATION OF THE MAIN ENTRANCE PANEL (P) Position Description Default value Value to be chosen Definition of panel as main panel Panel number Number of secondary panels with video unit in the building Type of call tone (type 1 or type 2) Number of times call tone is repeated Maximum time setting for conversation (seconds) Time setting to answer call (seconds)
Page 24
DIGITAL VIDEO DOOR ENTRY SYSTEMS CONFIGURATION OF THE SECONDARY ENTRANCE PANEL (S) Position Description Default value Value to be chosen Definition of panel as secondary panel Panel number Number assigned to the main panel of the building Type of call tone (type 1 or type 2) Number of times call tone is repeated Maximum time setting for conversation (seconds) Time setting to answer call (seconds)
Page 25
DIGITAL VIDEO DOOR ENTRY SYSTEMS CONFIGURATION OF EXTERNAL ENTRANCE PANEL (E) Position Description Default val Value to be chosen Definition of panel as external entrance panel Definition of external panel as main or secondary entrance panel Number of buildings in the estate Type of call tone (type 1 or type 2) Number of times call tone is repeated Maximum time setting for conversation (seconds)
DIGITAL DOOR ENTRY SYSTEMS TECHNICAL CHARACTERISTICS AUDIO UNIT GRF-211 TERMINALS INACTIVE AT REST WORKING Estates Operating temperature - VIDEO UNIT TCB-040 TERMINALS INACTIVE WORKING (1) In cases of multiple points of entry, when any entrance panel video unit is activated. (2) In estates, when the external entrance panel video unit is activated.
DIGITAL DOOR ENTRY SYSTEMS TROUBLE SHOOTING Ensure that the entrance panels of the installation are correctly configured. No monitor/telephone can be heard from the entrance panel To do so, check that the values selected in the different positions of the Check the volume control on the panel.
Page 29
DIGITAL DOOR ENTRY SYSTEMS panel defined as the main one. Make sure that the multiple-access video different entrance panels. If you cannot find the fault there may be line is correctly loaded (resistence of 220 ohms in the unused terminals something wrong with the audio unit.