Operation; Pre-Operation Check; Check Engine Oil; Operation Instructions - Zipper Maschinen ZI-STE1100IV Manuel D'utilisation

11

OPERATION

Please check the product contents immediately after receipt for any eventual transport damage or missing parts.
Claims from transport damage or missing parts must be placed immediately after initial machine receipt and
unpacking before putting the machine into operation. Please understand that later claims cannot be accepted
anymore.
11.1

Pre-operation check

11.1.1

Check engine oil

See capture maintenance => engine oil change
11.1.2

Check fuel

Place the machine on a firm and flat surface.
Open the fuel cap.
Check the fuel filter.
Never refuel without fuel filter!
Fuel must be unleaded gasoline
NEVER REFUEL IF THE ENGINE IS RUNNING!!
11.2

Operation instructions


Always place the machine on a firm and flat surface! No turning, tilting or moving during the
engine is running

Always check oil and fuel level before starting

Do not connect the appliance before the unit is running at full speed. Disconnect the
appliance before turning the unit off.

Connected devices must be in perfect condition.

Keep the cable length to the consumer as short as possible.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-STE1100IV
N O T I C E
The generator is delivered without engine oil and fuel!
Engine oil 15W40 must be filled before first use!
N O T I C E
OPERATION
24