Publicité
Les langues disponibles
Les langues disponibles
E Instruction Manual
Choose the correct opening
depending on the size of the
pet and the condition of the
claws:
Opening
rabbits
Opening
and cats
Opening
dogs (remove protective cover
and guide the claw sideways to
the grindstone)
Acquaint your pet with the
device step by step and touch
the claws to start with without
switching the device on. Then
get your pet used to the sound.
Hold the device with your
right hand and use the ON/
OFF switch to turn it on. Your
left hand splays the paw and
carefully guides one claw to the
opening at a time. Then you can
start with the claw care.
For safety reasons you should
not work on one claw for longer
than 5 seconds. In between, the
angle of the claw needs to be
readjusted. It should be about
45 degrees.
If this is your pet's first treat-
ment or the claws are very
long, it is recommended not
to grind the claws too short.
This prevents the claws from
bleeding.
Cleaning:
1. Rotate the grinding head anti-
clockwise, remove protective
cover.
2. Switch the claw grinder on.
Touch the moving parts care-
fully with an eraser or a moist
cloth to remove claws dust
from the surface.
4
: for guinea pigs/
: for small dogs
: for medium-sized
1
2
3
Publicité
