I - Initial Verification; Unpacking The Harmonys; Cleaning; Pre-Requisit - Bodet HARMONYS Notice D'utilisation Et D'installation

I - Initial verification

Thank you for choosing a BODET Harmonys. This product has been carefully designed for your
satisfaction based on ISO9001 quality requirements.
We recommend that you read this manual thoroughly before attempting to manipulate the
product.
Keep this booklet during all the life of your product, so that you can refer to it each time it is
necessary.
Bodet cannot be held responsible for damages caused to the product due
to use that does not conform to the instructions described in this manual.
Any unauthorised modification of the product will invalidate the warranty.

1.1 Unpacking the Harmonys

Unpack with caution and check the contents.
For 907710, wall mounted model it must contain:
■ Wall sounder,
■ This quick start.
For 907720, ceiling mounted model it must contain :
■ Ceiling sounder,
■ This quick start.

1.2 Cleaning

Use an antistatic product.
Never use alcohol, acetone or other solvents which may damage product casing.

1.3 Pre-requisit

For the commissioning of the Harmonys sounder, you must install the SIGMA software (supplied
on CD with your master clock) on your PC. To download the latest version of the software, contact
our export department who will send you the download links by email: export@bodet-timesport.
com.
To check compatibility of your equipment and the software version, please have the
version of your master clock.
Safety and Emergency Procedures alarms (SEP) and melodies are available for download on the
Bodet website at the following address :
http://www.bodet-time.com/en/bell-systems/download-melodies.html
the Ethernet network connection to which the Bodet Harmonys is connected must be PoE,
the power being supplied by a PoE switch or a PoE injector. Make sure that the power
capacity of your switch or injector is sufficient to power your product.
Bodet recommends the following brands:
■ PoE injectors: Zyxel, Tp link, D-Link, HP, Cisco, Axis, ITE Power Supply, PhiHong, Abus,
Globtek.
16
■ PoE switches: D-Link, HP, Planet, Zyxel, Cisco, NetGear, PhiHong.